Announcement

Collapse
No announcement yet.

another hf251d-1 question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • another hf251d-1 question

    Looking thru the threads with no answer........adding the frequency unit to a welder that has a fixed ac balance, will the unit change the balance or will it maintain that balance for aluminum welding... ie.. reading threads on higher freq settings for better arc control on certain aluminum joints,,mainly butt joints to prevent arc wander. Typical machines with fixed balance are the older syncrowave 180's and the newer diversion 165 and 180.

  • #2
    Originally posted by thezman View Post
    Looking thru the threads with no answer........adding the frequency unit to a welder that has a fixed ac balance, will the unit change the balance or will it maintain that balance for aluminum welding... ie.. reading threads on higher freq settings for better arc control on certain aluminum joints,,mainly butt joints to prevent arc wander. Typical machines with fixed balance are the older syncrowave 180's and the newer diversion 165 and 180.
    an HF box will have NO effect on AC balance or welder arc frequency....(or amperage control)... those are determined solely by the welding power source

    the HF-251 was primarily intended as an accessory for engine drives like the Trailblazer to provide High Frequency arc starting and stabilization to make TIG welding easier for those units..

    Here is a link to the manual that will show their utility...

    http://www.millerwelds.com/om/o611w_mil.pdf
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment

    Working...
    X