I have a dialarc 250 hf welder that i picked up cheap, trying not to break the bank i bought a used rfc-23a pedal for it that needs new plugs. Well wen i got it i found that it has two good cords on it but one has three wires and the other has five, which does not seem right since it is supposed to have a two prong and three prong plugs. So i looked up the manual with the schematic and found that it does seem to only need two wires for the two prong plug and three for the three prong. So i figured someone just had good cords laying around and used only the wires they needed. So i opened the casing to see which were used and to my suprise they used all of the five wires on the five wire cord and all three on the three wire. Now im pretty stumped i looked at every manual shown for all models of the rfc-23a and none are wired like this one. Anybody have any suggestions or maybe know why this is?
No announcement yet.
Rfc-23a foot pedal