No announcement yet.

what conductor size for 100 FEET

  • Filter
  • Time
  • Show
Clear All
new posts

  • what conductor size for 100 FEET

    I have a new MM211, the manual says "conductor data in this section specifies conductor size (excluding flexible cord or cable) between the panelboard and the equipment. If a flexible cord is used minimum conductor size may increase. 230V single phase, 60 Hertz, 14 AWG, 53 FEET. What conductor size do I need for total of 100 FEET? I have a 100 AMP service box in my shop. Thanks

  • #2
    Cord size

    Try this page 83 in my reader or 79 in the book.
    Looks like 10Ga. will do the job.
    Good Luck,
    Millermatic 252 w/30A
    Big Blue Air Pak
    Ellis 3000 Band Saw
    Trailblazer 302 Air Pak w/ Wireless Remote
    Dynasty 200 DX
    XMT 350 MPa w/S-74 MPa Plus
    Millermatic 211
    Passport Plus
    Spectrum 625 X-TREME
    Lincoln SA-200 Blue Tint Red Face '63
    2-Lincoln SA-200 Red Face '68
    SA-200 Black Face '59
    SA-200 Green Lite '84
    SA-200 Green Lite '80
    SA-200 Red Face '69
    SA-200 Red Face '66
    SA-200 Green Lite '81
    '70 Black Face Round Barrel