Announcement

Collapse
No announcement yet.

Millermatic 210 won't arc

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Millermatic 210 won't arc

    i CHANGED OUT THE SELECTOR DUE A BURNED OUT CONTACT. PRIOR DO DOING THAT I TURNED IT OVER TO ANOTHER RANGE AND IT WORKED FINE SO i REPLACED THE SELECTOR AND NOW IT WON'T LITE UP. FAN DRIVE ROLLS WORK BUT NO ARC. I NEED TO STAART LOOKING FOR THE PROBLEM AND DON'T WHERE TO START FIRST. I COULD USE SOME HELP ON THIS.

  • #2
    Did you replace that switch one wire at a time matching the numbers that are on the back of the switch? Sounds like you wired it wrong.

    Comment


    • #3
      Well, if it worked and now it doesn't, the above post seems to be your best answer, of wiring it wrong...

      Comment

      Working...
      X