Announcement

Collapse
No announcement yet.

Why were the Miller Welding Forums down for so long?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Why were the Miller Welding Forums down for so long?

    Last week we posted an announcement that the Forums would be offline for approximately 6 hours while we installed an upgrade. During the process of upgrading the vBulletin software that the Forums use, we ran into some unforeseen technical challenges that kept the Forums offline for longer than we wanted or anticipated. We have reverted back to the old version for now, so that you can once again log in and post on the Forums. We are so sorry for the inconvenience this has caused so many members. Thank you for your patience during this time, and we will let you know the new date for the upgrade as soon as it is confirmed.
    Last edited by Miller Welders; 04-24-2014, 09:19 AM.

  • #2
    I'm glad it's back up but I found that 'new' version to be quite ugly compared to this one..... I know people don't like change, usually, but this board fits in with the Miller 'look'. That new one does not, at all. Didn't get a chance to use it much but if the function is anywhere as 'off' as the look -- I don't like it!Just my 2 cents!!!

    Comment


    • #3
      I'm glad it's back up but I found that 'new' version to be quite ugly compared to this one..... I know people don't like change, usually, but this board fits in with the Miller 'look'. That new one does not, at all. Didn't get a chance to use it much but if the function is anywhere as 'off' as the look -- I don't like it!Just my 2 cents!!!

      Comment

      Working...
      X