Announcement

Collapse
No announcement yet.

RFC 23A Foot Pedal

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • RFC 23A Foot Pedal

    Looking for a RFC 23A foot pedal for my Dialarc HF-P. Anybody know of any places to purchase one used that's not going to break the bank? I haven't seen a used one for sale for under$175. I understand they're almost $400 new. But ****. Any help would be appreciated. Thanks for your time. Mike

  • #2
    Anybody?

    Comment


    • #3
      Originally posted by Blackmarket View Post
      Anybody?
      Ebay is probably your best bet..

      do a search on there "Miller Pedal" and sort through the results..

      I see them fairy often.. but they are getting rarer...

      they have been out of production for 30+ years...

      Another option might be to get your hands on a Miller Mic-4 adapter

      then you could run a standard RFCS-14 pedal..

      here is an old thread on the subject..

      http://www.millerwelds.com/resources...c+hand+control
      Last edited by H80N; 04-06-2014, 02:09 PM.
      .

      *******************************************
      The more you know, The better you know, How little you know

      “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

      Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

      My Blue Stuff:
      Dynasty 350DX Tigrunner
      Dynasty 200DX
      Millermatic 350P w/25ft Alumapro & 30A
      Millermatic 200

      TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

      Comment


      • #4
        I used an RFC-14 pedal that I got for $30.00 used and replaced the large resistor and the two plugs with the correct parts for the RFC-23 and wired it as an RFC-23. All the parts are the same other than the resistor, the plugs and the schematic. the Miller parts were only $70.00, a nearly new RFC-23 for $100.00! The RFC-14 pedals seem easier to find and mine has worked great on a DIALARC-HF-P for years
        Last edited by oldmachinenut; 04-06-2014, 03:52 PM. Reason: posted blank

        Comment


        • #5
          Originally posted by H80N View Post
          Another option might be to get your hands on a Miller Mic-4 adapter
          Trouble is, they're VERY hard to find and command a proud price.

          If you ever run across one . . .
          MM200 w/spot controller and Spoolmatic 1
          Syncrowave 180 SD
          Bobcat 225G Plus LPG/NG w/14-pin*
          *Homemade Suitcase Wire Feeder
          *HF-251D-1
          *WC-1S & Spoolmatic 1
          PakMaster 100XL
          Marquette "Star Jet" 21-110
          http://www.millerwelds.com/images/sm...rolleyes.png?2

          Comment


          • #6
            Thanks guys for all the info. I think I might look into the re-wiring rfc 14 option. A buddy seems to think he has a resistor sitting around. We'll see what happens. Thanks again.

            Comment

            Working...
            X