Announcement

Collapse
No announcement yet.

Roughneck 1E Information

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Roughneck 1E Information

    Recently acquired a Miller Roughneck 1E and was looking for some information on the machine, as well as age. I went to the miller site and put in the serial number and I says that it cannot find a match, also was curious on the capabilities of the machine as far as welding and as a generator. Any information would be appreciated. Serial number is HJ193135.

  • #2
    The machine was made in 1978.

    180 Amps @ 100% Duty Cycle

    3.5 kva 30.4 amps 115 volts 60 cycle

    Comment


    • #3
      Here's your manual from the Miller site that should answer your questions.
      http://www.millerwelds.com/om/o419e_mil.pdf

      For older units you have to search by clicking on Locate your manual by model name and the SN to get to the correct edition.
      MM200 w/spot controller and Spoolmatic 1
      Syncrowave 180 SD
      Bobcat 225G Plus LPG/NG w/14-pin*
      *Homemade Suitcase Wire Feeder
      *HF-251D-1
      *WC-1S & Spoolmatic 1
      PakMaster 100XL
      Marquette "Star Jet" 21-110

      Comment

      Working...
      X