Announcement

Collapse
No announcement yet.

syncrowave 210 and manually purging gas, seems to not exist. How can I add?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • syncrowave 210 and manually purging gas, seems to not exist. How can I add?

    This'll be my first post in at least 4 years, if not more on this site. For the past few years, I haven't been into welding and just got back into and it is surely great to be welding again! My old machine was a Syncrowave 200 and I was used to all the functions on that machine. My new machine is a Syncrowave 210 and I thought it was to be surely an upgrade and only 1 thing so far is preventing me from thinking that, which is being able to manually purge the gas system, either to be empty after the day's work or to be able to set the gas flow exactly where you want it set on the flowmeter/regulator.

    My question is that does an inline purge system exist that can be connected in between the flowmeter/regulator and the welding machine? Or how about do you guys go about this situation or does it not even cause a worry at all?

  • #2
    Why not just set your amps to low/zero and hit the pedal for about a minute to purge the lines and torch..??
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #3
      Originally posted by H80N View Post
      Why not just set your amps to low/zero and hit the pedal for about a minute to purge the lines and torch..??
      good idea! I will try this out next time I'm out in the shop.

      Comment

      Working...
      X