Announcement

Collapse
No announcement yet.

Trailblazer 302

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trailblazer 302

    Do the GAS powered 301 and 302 trailblazers have enough juice to run, I hate to say it on the Miller forumn, but a LN-25 ? Or will I be kicking myself down the road if I by one. Money is kinda tight right now so I cant really afford a diesel atm. Any recomndations or advise would be appreciated
    WORK HARDER.....MILLIONS ON WELFARE DEPEND ON YOU!!!!

  • #2
    Of course, now you HAVE to set your engine to 62.5 hz probes in the 120 vac receptacle terminals. On a Kohler the adjusting nuts are on the right side of the back of the engine near the exhast with a couple of 3/8" gland nuts. On an onan, the adjuster is above the right side valve cover. you have to loosen off a 10mm nut and adjust a 8mm/ 5/16 lock nut and tighten a adjuster bolt.

    Comment


    • #3
      I have a ln 25 and a vs 8 and they both run wire ok my 302tb. The vs8 or vs12 will be more compatible to the miller machine.

      Comment


      • #4
        Ln 25 will run fine...I do it all the time

        Comment


        • #5
          Originally posted by beamwalker View Post
          Ln 25 will run fine...I do it all the time
          Ok, Bless me FATHER for I have sinned .

          Comment


          • #6
            Yep, works great on my TB251.

            Comment

            Working...
            X