Announcement

Collapse
No announcement yet.

trailblazer service manual.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • trailblazer service manual.

    Hello folks. I am having trouble finding a service manual or service help for this unit. I would like to buy a service manual or maybe get some tech help. If it is not available Please let me know.

    Miller Trailblazer 301G
    Stock No. 907042
    SN: LE 077989
    1,069 housr on unit.

    Does Miller sell Service manual for this unit?
    Thanks for any help.

  • #2
    It's possible if you call them,,,, but I don't think so

    what seems to be the problem

    Comment


    • #3
      If it is engine related then you can get the engine manual usually off e-bay. If it is welder related then there are people here who can help.
      MM250
      Trailblazer 250g
      22a feeder
      Lincoln ac/dc 225
      Victor O/A
      MM200 black face
      Whitney 30 ton hydraulic punch
      Lown 1/8x 36" power roller
      Arco roto-phase model M
      Vectrax 7x12 band saw
      Miller spectrum 875
      30a spoolgun w/wc-24
      Syncrowave 250
      RCCS-14

      Comment


      • #4
        Thank you both for the reply. Engine is fine. We have erratic or inconsistent welding. I have read the Troubleshooting portion of the owners manual, and decided to check and clean and re-check every related connection, brushes, slip rings. We have already replaced Control PCB PC2. If I get through this and still do not have a good feeling for the fault then I will let you know. Thanks again.

        Comment


        • #5
          Whats the engine rpm. Welder wise its tested off the 120Vac receptacles in frequency (HZ). Yours MUST BE 62.5hz.

          Comment

          Working...
          X