Announcement

Collapse
No announcement yet.

Need help hooking up Air-Cooled TIG torch to Miller Pheonix 456!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help hooking up Air-Cooled TIG torch to Miller Pheonix 456!

    I have a Weldcraft TIG torch and a Miller Pheonix 456..........how do I put the two together? Its gotta be pretty simple but I cant find any other help on the web

    Thanks

  • #2
    Originally posted by smrode View Post
    I have a Weldcraft TIG torch and a Miller Pheonix 456..........how do I put the two together? Its gotta be pretty simple but I cant find any other help on the web

    Thanks
    I hope that the torch you have is one with the built in gas valve...

    because I am not seeing a gas solenoid on the Phoenix... I could be wrong..

    http://www.millerwelds.com/om/o2213h_mil.pdf

    you wll need a powerblock to connect the torch to the Phoenix

    it is a 45V62 200amp for a large air cooled TIG torch that has the integral power cable built into the hose...

    Pretty self explanatory... it connects to the welder power stud... one side threaded for the fitting on the torch... the other side accepts standard argon gas hose fitting that goes to regulator and gas bottle..

    http://www.arc-zone.com/index.php?
    main_page=product_info&cPath=13_673_678_2141&produ cts_id=576


    the Phoenix does have the standard 14pin connector so you could use a RFCS_14 pedal..
    (see the manual)
    Last edited by H80N; 01-30-2014, 02:32 PM.
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #3
      What I do, is merely get myself the dinse or reg camlock connector that goes into the machine and a tig block. Then I braze the 2 together. Easy peasy.

      Comment

      Working...
      X