If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Technically yes it will work. The problem is these tanks are only 10 cu ft. so the draw rate is very small. What do you want to use it for? Anything bigger than a small tip is to big as the tanks can't supply enough acetylene safely. Here is another thread on this.
Lincoln ac/dc 225
MM200 black face
Whitney 30 ton hydraulic punch
Lown 1/8x 36" power roller
Arco roto-phase model M
Vectrax 7x12 band saw
Miller spectrum 875
30a spoolgun w/wc-24