No announcement yet.

coreshield 8

  • Filter
  • Time
  • Show
Clear All
new posts

  • coreshield 8

    I have a lot of experience with innershield as far as 232 and 233 but im looking for tips on coreshield 8. I need to get tips for overhead and verticle. the vert is only half in and the overhead is one inch. both are groove welds. any help would be appreciated.

  • #2
    They are all T-8 wires. If you can run 232, you should have no problem running Coreshield 8. Coreshield 8 runs more similar to 233 than 232, both 233 and Coreshield 8 are much more user-friendly than 232.

    You should go to the ESAB website and download the wire speed, voltage, amperage, etc. parameters, and then practice. Like all T-8 wires, it is voltage-sensitive and also stickout is critical.
    Last edited by JSFAB; 12-09-2013, 04:23 PM. Reason: clarification
    Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....


    • #3
      coreshield 8

      Core 8 runs great really shouldn't be any different if you have ran 232
      Syncrowave 250
      Millermatic 210
      dialarc 250
      spectrum 375x
      trailblazer 302
      Lincoln 135