Announcement

Collapse
No announcement yet.

Millermatix 250X fan

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Millermatix 250X fan

    How often should the fan come on while welding, I've owned mine for years and don't think I ever heard it run, Should the gun handle get hot while you weld?, I did some welding last night and the machine performed great, when I went out today to finish up kept getting bird nest, I changed the tip but still did the same thing, I'll replace the liner tomorrow, I hope it's nothing bad wrong with it..

  • #2
    Fan is thermostatically controlled based on the temp of the transformer.You would have to run it pretty hard to get the fan to come on.
    Sounds like you have a kinked liner.Also check you drive rolls and inlet guide alignment while you are in there.

    Comment

    Working...
    X