Announcement

Collapse
No announcement yet.

welding ford e250 exhaust pipe.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • welding ford e250 exhaust pipe.

    I need to cut out and replace a piece of exhaust pipe on a ford e250 van. Is the tubing galvanized or aluminized. What is the proper prep required. Also I will be tig welding it. What kind of filler rod should I use. Is there anything I should do after welding such as coating it with something to avoid corrosion.

  • #2
    if its after 1986....

    After 1986 it is a low grade stainless, thus the reason for rust. I normally use standard mig wire, just be sure in clean on the inside and outside.
    Kevin
    Lincoln ranger 305g x2
    Ln25
    Miller spectrum 625
    Miller 30a spoolgun
    Wc115a
    Lincoln 210mp
    F550 imt service truck

    Comment


    • #3
      welding ford e250 exhaust pipe.

      Second that. Just mig it with the solid wire and make sure it's really clean. Did something similar to that about a year ago turned out great
      Syncrowave 250
      Millermatic 210
      dialarc 250
      spectrum 375x
      trailblazer 302
      Lincoln 135

      Comment


      • #4
        Mig is for 150 trucks.

        Comment

        Working...
        X