Announcement

Collapse
No announcement yet.

millermatic 35 problem

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • millermatic 35 problem

    my wire is hot all the time even with trigger control unpluged from front of machine. any help is appreciated.
    thanks

  • #2
    Contactor might be stuck...

    please post your serial number..

    have you downloaded the manual?? it has the schematic..

    make sure you plug in your serial number to get the correct version..

    number should be stamped into the front panel..

    http://www.millerwelds.com/service/ownersmanuals.php
    Last edited by H80N; 11-26-2013, 08:28 AM.
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #3
      jb574929 i think all contactors were closed with unit on

      Comment


      • #4
        AS H80 said. " The contactor is stuck" So fix or replace it. Pretty simple!

        Comment


        • #5
          thanks

          i found stuck contactor works great again thanks for your help

          Comment


          • #6
            Originally posted by 56builder View Post
            i found stuck contactor works great again thanks for your help
            Glad you got it sorted out... and back in operation...
            .

            *******************************************
            The more you know, The better you know, How little you know

            “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

            Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

            My Blue Stuff:
            Dynasty 350DX Tigrunner
            Dynasty 200DX
            Millermatic 350P w/25ft Alumapro & 30A
            Millermatic 200

            TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

            Comment

            Working...
            X