Announcement

Collapse
No announcement yet.

new Hobart Handler 210 mvp won't feed.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • new Hobart Handler 210 mvp won't feed.

    brand new the unit fires up. re hooked the gun and connection....no go.....tried every position on voltage and wire speed.....no go.....switched polarity for straight wire......no go......flipped spool gun switch several times.....no go.....machine turns on and fan runs.....any suggestions? Thx. Dave

  • #2
    One of the wires came off the trigger...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      Jumper out the trigger terminals at the machine with a paper clip. Playing with the other crap does zero to help. Did the machine not come with an owners manual????

      Comment


      • #4
        If it is new, take it back

        Comment


        • #5
          It has a manual. I heard they get stuck between voltage settings....reason I tried the other crap.

          Comment


          • #6
            Ended up being the big wgite plug inside that connects to board. Talked to Bill at hobart tech....very helpful.said some harnesses were wound too tight...that was the case and the plug wasn't "locked" in....Dave
            Originally posted by JerseyWelder View Post
            It has a manual. I heard they get stuck between voltage settings....reason I tried the other crap.

            Comment


            • #7
              Hobart has great customer service. Glad you fixed it. I have the same unit and love it.
              HH 210MVP
              Spoolrunner 100
              Powercraft AC buzz box
              Lotas LTP5000D plasma
              Victor Oxy/Acet
              30 ton press
              A few brand name tools
              Lots of no name tools
              A wife to worry me
              and 4 dogs to supervise me

              Comment


              • #8
                Glad it got solved. What do you think of the welder now?

                Comment


                • #9
                  It blows my old handler 175 away......I like it more on small stuff than my old mm210....I am running .023 as I love it in these small machines. Gonna try my .035 Outershield E71M and CO2 soon .....dual shield fluxcore....
                  Originally posted by Cgotto6 View Post
                  Glad it got solved. What do you think of the welder now?

                  Comment

                  Working...
                  X