Announcement

Collapse
No announcement yet.

Trouble with an Econo twin HF

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trouble with an Econo twin HF

    I have an old Econo twin HF I tig with. When I run it in ac for aluminium it trips the reset in about 20 or so seconds. Has anyone had this problem ? I am also looking to see if I can locate a service manual for it through miller. Thanks for any ideas

  • #2
    Originally posted by 1949F1 View Post
    I have an old Econo twin HF I tig with. When I run it in ac for aluminium it trips the reset in about 20 or so seconds. Has anyone had this problem ? I am also looking to see if I can locate a service manual for it through miller. Thanks for any ideas
    Bad shorted recifier diode.

    Comment

    Working...
    X