I recently received a spoolmate 100 spool gun. I am using it with the multimatic 200. I can lay down a good bead with the spray transfer on the flat side of the 3/4" x 3/4" square aluminum tubing 1/16" thick. However when I go to weld the joint sections, it looks like I am laying down worm droppings. Does anyone have some advice as what I may be doing wrong. 100% argon, 14 amps with 320 wire speed. This is what the setting is at for laying down the good bead on the flat.
No announcement yet.
Spoolmate aluminum helpPage Title Module
Move Remove Collapse