Announcement

Collapse
No announcement yet.

50 series wire feeder help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 50 series wire feeder help

    I just bought a S-52A wire feeder and after it was delivered I noticed that it was a dual plug power cord. This will not work with my 2010 trailblazer 302 efi but I want to know if I can change the plug to a Nema 14-50P so I can use this with my tb. If not is there another way to be able to use the wire feeder with my tb. I don't want to ruin either machine by doing something incorrectly. I am not an expert so be specific.
    Please help
    Thanks

  • #2
    Easy to do with the right know how, but for all intensive purposes just take it in to a welder shop. 1/2 hr its out the door.

    Comment


    • #3
      Build an adapter? I have a short 6' adapter cord with a 14-50p to 6-50r. Works great.
      MillerMatic 251
      Maxstar 150 STH
      Cutmaster 42
      Victor Journeyman OA

      A rockcrawler, er money pit, in progress...

      Comment


      • #4
        HUh??? its a 14 pin amphenol and 5 wire control cable that hooks into the buss bar in the feeder, WTF are you talking about

        Comment

        Working...
        X