Announcement

Collapse
No announcement yet.

I have a code number....

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bob Miller
    started a topic I have a code number....

    I have a code number....

    I can get a SA-200 with code number 8023. The face plate was replaced and does not have a serial number. I got the code from the barrel.
    It's a first generation green light. The second generation green light has the warning face plate.
    My '84 is a warning lable, it's code is 8791. My '80 is a first gen green light, with a code number of 8244.

    So is there any way to find out what is the exact year of that SA-200 with code number 8023.
    Thank you,
    Good Luck,
    Bob

    PS. The only SA-200 I don't have is the post Red Face, Black Face that goes untill the first gen green light. So say '71 untill maybe '79.
    Last edited by Bob Miller; 10-07-2013, 03:47 PM. Reason: correct numbers

  • H80N
    replied
    Originally posted by cruizer View Post
    For sure if'in he had a serial# which he doesn't, and if it was made in the states NOT in Canada. It would be easy to find the date.
    "Engine" serial number....

    can't hurt to try...
    Last edited by H80N; 10-09-2013, 06:47 PM.

    Leave a comment:


  • cruizer
    replied
    Originally posted by H80N View Post
    Wisconsin has an online search..

    Serial Number Search
    All Wisconsin Motors engines sold since 1939 have been issued serial numbers. Feel free to search our database and find information about your engine.

    http://wisconsinmotors.com/support_serial_search/

    For sure if'in he had a serial# which he doesn't, and if it was made in the states NOT in Canada. It would be easy to find the date.

    Leave a comment:


  • H80N
    replied
    Wisconsin has an online search..

    Serial Number Search
    All Wisconsin Motors engines sold since 1939 have been issued serial numbers. Feel free to search our database and find information about your engine.

    http://wisconsinmotors.com/support_serial_search/

    Leave a comment:


  • cruizer
    replied
    Certainly Not going to get you anywhere without a serial#. Guesstimate puts it anywhere between 1975 and 1980, but thats the furthest you'll get.

    Leave a comment:


  • H80N
    replied
    Bob

    you could always get the engine serial# and email it to Wisconsin/Continental..

    bet they could tell you when it was made...

    likely just a bit before near the time the whole welder was built..

    Leave a comment:


  • Bob Miller
    replied
    Thanks guys, good information.
    What I gleaned from all that is, Code 8023 predates my 1980 SA-200 by 1 code 8244.

    I tried to figure how many codes per year and that came out at about 2, but not always true. Not all codes went in order.
    8023 goes with the 8000 and below, and 8017 goes with 8200 and above.
    So all I know now is it is close to a '80 year model.

    sberry, the welder in that old post with the picture of you welding with that black face, looks like the first black face that came out after the red face years.
    Rounded top corners on the face plate just like the red face.
    What year is that welder? Or if you don't know the year, PM me with the serial number please.(first 3 if under 1 million, 4 if over, 1 million came in '83)

    I had a large folder with all the information I learned about SA-200s over the years, turned up missing. My wife says she has never seen it.
    Good Luck,
    Bob

    Leave a comment:


  • H80N
    replied
    Originally posted by Bob Miller View Post
    I can get a SA-200 with code number 8023. The face plate was replaced and does not have a serial number. I got the code from the barrel.
    It's a first generation green light. The second generation green light has the warning face plate.
    My '84 is a warning lable, it's code is 8791. My '80 is a first gen green light, with a code number of 8244.

    So is there any way to find out what is the exact year of that SA-200 with code number 8023.
    Thank you,
    Good Luck,
    Bob

    PS. The only SA-200 I don't have is the post Red Face, Black Face that goes untill the first gen green light. So say '71 untill maybe '79.
    Do not know about the exact year... but the owners manual for code 8023 was published in 1993.. may be revision date.

    Here is the link to the PDF

    #1
    http://www.lincolnelectric.com/asset...oln3/im276.pdf

    #2
    http://www.lincolnelectric.com/asset...oln3/im277.pdf


    also.. you can download other manuals and parts books by plugging that product code in here

    http://www.lincolnelectric.com/en-us...r-manuals.aspx

    If you would like an Operations/Service & Overhaul manual for the engine...
    it is a free download...

    http://igor.chudov.com/manuals/Conti...aul-Manual.pdf
    Last edited by H80N; 10-08-2013, 04:35 PM.

    Leave a comment:


  • Broccoli1
    replied
    http://www.millerwelds.com/resources...SA-200-numbers

    maybe something in this thread can help

    Leave a comment:

Working...
X