Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Generator for Maxstar 200 DX?

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Generator for Maxstar 200 DX?

    Hey guys, first time poster here.. I've searched posts and found threads about recommended generators for the Maxstar 150's but nothing on the 200. I bought a Miller Maxstar 200 DX a few weeks ago and am looking to run it off a generator. It has a 230v plug on it now. The airgas the guy I bought it from told me "no less then 10,000 watts" which seems awfully high, seeings how people are recommending 5500 watt for the Maxstar 150. My father has a 6500 watt gen., and a friend has a 8500 watt gen. Would either of these work for me? Could I ruin/destroy my machine if I use a generator smaller then recommended? What advantages would having a 460v plug on it vs. a 230v plug? Would it be worth changing?

    Please, only considerate and helpful posts are wanted! Thanks for all the input everyone!

  • #2
    Welcome aboard...

    you might re run your search as "Dynasty Generator" there have been scads of good threads on the subject... the Dynasty 200 has the same power requirements as the Maxstar 200....

    Comment

    Working...
    X
    Special Offers: See the latest Miller deals and promotions.