Announcement

Collapse
No announcement yet.

New To the Forums

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • New To the Forums

    Hello to the all of the miller welding fans out there.

    I'm new to the forums. What i wanted to know was which machine you guys would recommend. I have mig welding experience, and some tig welding experience. I'm by no means an expert or do this for a living. I graduated earlier this year from school with a degree in construction engineering/construction management. I'm currently looking for work, so i cant invest into a machine currently. I'm using my buddy's miller 135. I had to change the regulator to get it going. But since he is working on his 1950 Willys Jeep, he is doing hole and panel repair and is complaining about burning holes/burning through in the metal. Sorry for the long post.

    But my question is 2 fold: Any suggestions to get the job done using the miller 175? Or is it better to use the miller 135?

    Second: Should i get the miller millermatic autoset 140,180, or just spring for the 211? Since im new to welding and like working with my hands. I would like to learn as many processes as much as possible. So I was also considering the miller multimatic 200. The only thing im bummed about that unit is no AC TIG and no High Frequency TIG. Being new to TIG dont know how i would do with scratch start. Would I mess up tungsten alot?

    So what are your thoughts on these machines? I dont currently see any need for aluminum welding I would be doing where i would need the smaller torch size of the tig torch rather than a mig machine with a spool gun.

    What are your thoughts?


    Thank you and I really appreciate all the tips and advice.
    Last edited by jakgop21; 09-17-2013, 05:40 PM.

  • #2
    My vote MM211...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      Tell your buddy to run 023" wire, He'll be much happier with the results, second off, maybe get a job, if your still into welding, then we'll advise you. No point buying something "just to get you by".

      Comment


      • #4
        As cruiser said, just wait.


        You mentioned in one paragraph you can't invest right now but then ask us about a couple machines???


        Might be a MM 211.5 out by the time yer ready 😁
        Ed Conley
        http://www.screamingbroccoli.net/
        MM252
        MM211
        Passport Plus w/Spool Gun
        TA185
        Miller 125c Plasma 120v
        O/A set
        SO 2020 Bender
        You can call me Bacchus

        Comment


        • #5
          I have a 180 and love it. It has worked flawlessly for 4 years. But if I was gonna buy another machine I would pick up a 211 for the dual voltage capability, or keep my eye out for a used 252 or 251 for some more power.

          Comment


          • #6
            Welcome to the forum 21.
            Lincoln A/C 225
            Everlast PA200

            Comment


            • #7
              New To the Forums

              I love my 211. I am really surprised at what she will weld with only 120v input. IF I had to do it again I would probably buy the Multimatic 200 though. Just my $.2.

              Comment


              • #8
                Originally posted by Precision View Post
                I love my 211. I am really surprised at what she will weld with only 120v input. IF I had to do it again I would probably buy the Multimatic 200 though. Just my $.2.
                Me too...
                MillerMatic 211 Auto-set w/MVP
                Just For Home Projects.

                Comment


                • #9
                  Originally posted by Precision View Post
                  I love my 211. I am really surprised at what she will weld with only 120v input. IF I had to do it again I would probably buy the Multimatic 200 though. Just my $.2.
                  The Multimatic 200 is worth it for sure. But if all you are doing is Mig and not traveling with it then a 211 would be great. You can never have enough power because you can always dial it down.

                  Comment


                  • #10
                    Becoming more impressed with my 211,

                    Had some 3/8 plate to weld the other day, the 211 made light work of it. I think it states that's one pass max for the machine but I could have actually turned it down a bit.

                    Comment


                    • #11
                      New To the Forums

                      Yeah, mine burns hot too. I'm not complaining!!!

                      Comment

                      Working...
                      X