Announcement

Collapse
No announcement yet.

Bobcat Brushes

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • txrpls
    started a topic Bobcat Brushes

    Bobcat Brushes

    I just recently purchased a used Bobcat 250 with 1500 plus hours. I was reading the manual and it said the brushes needed to be replaced every 500 hours. I called the previous owner and he said he had never changed the brushes. The machine welds fine and the generator works fine. Should I change the brushes and is it a lot of trouble?

  • Kpack
    replied
    You should be able to tell from the feed wire to each brush . No slack its getting time. I figured cruzier would say about 2000. But know I now.

    Leave a comment:


  • cruizer
    replied
    Never heard of brushes going out at 500 hours, 2000 hrs maybe, 3000hrs likely

    Leave a comment:


  • walker
    replied
    Brushes are cheap. I found them cheapest on Ebay, I think I got 10 for the price of 3 from miller4less, plus free shipping.

    They are a piece of cake to replace.

    Leave a comment:

Working...
X