Announcement

Collapse
No announcement yet.

XMT 300 CC CV Diagnosis Unusual Sounds and LED Dysfunctional Miller Video Link

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • XMT 300 CC CV Diagnosis Unusual Sounds and LED Dysfunctional Miller Video Link

    Newly acquired welder that welds as expected both with stick and wire feeder.

    When powering up there is a one time loud click. also, when the output contactor is moved into the ON position there a constant buzzing noise.

    When purchased the input was wired for 3 phase. I converted it to single phase and bypassed the red wire.

    Serial Number KD395855

    Video Link:

    http://www.youtube.com/watch?v=JjHQD...ature=youtu.be
    Last edited by jimybud; 09-10-2013, 09:01 AM.

  • #2
    Buzzing is completely normal, the loud click is the unit determining the supplyed power, and if it actually works you have no worries....

    Comment


    • #3
      XMT 300 CC CV to Spoolmatic 3 Cable Connector

      could someone provide a part number or a link to where I could purchase an Cable connector? I have attached a photograph of the two units I want to quick connect.Click image for larger version

Name:	IMG_20130925_094842.jpg
Views:	2
Size:	41.6 KB
ID:	516073

      Comment


      • #4
        sorry I could not figure out how to bring the photograph inline so it will have to be clicked with the mouse to view it. the link is below.



        Click image for larger version

Name:	IMG_20130925_094842.jpg
Views:	2
Size:	41.6 KB
ID:	516074

        Comment


        • #5
          Originally posted by jimybud View Post
          sorry I could not figure out how to bring the photograph inline so it will have to be clicked with the mouse to view it. the link is below.



          [ATTACH]33102[/ATTACH]
          Try this

          http://miller4less.com/product_info....ducts_id=36406

          Manual page #28 item #17

          http://www.millerwelds.com/om/o2205l_mil.pdf
          .

          *******************************************
          The more you know, The better you know, How little you know

          “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

          Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

          My Blue Stuff:
          Dynasty 350DX Tigrunner
          Dynasty 200DX
          Millermatic 350P w/25ft Alumapro & 30A
          Millermatic 200

          TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

          Comment


          • #6
            Looks to me that he has the female Dinse, but needs the male plug to go into it. But I've been wrong way more times than I can count.
            Tim

            Many cordless tools...........
            2 cordless hammers
            2 cordless punches
            1 cordless chisel
            2 cordless screwdrivers, 1 + and 1 -
            and a cordless adjustable wrench that also doubles as a hammer.....

            Comment


            • #7
              Originally posted by pin2hot View Post
              Looks to me that he has the female Dinse, but needs the male plug to go into it. But I've been wrong way more times than I can count.
              OK then... was not sure about that...

              http://weldingdirect.com/connectors.html
              .

              *******************************************
              The more you know, The better you know, How little you know

              “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

              Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

              My Blue Stuff:
              Dynasty 350DX Tigrunner
              Dynasty 200DX
              Millermatic 350P w/25ft Alumapro & 30A
              Millermatic 200

              TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

              Comment

              Working...
              X