Announcement

Collapse
No announcement yet.

maxstar 200dx parts?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • maxstar 200dx parts?

    where can I get the gas receiver fitting that goes into the face of the machine as well as the clip to hold it in and the hose to connect to the solenoid? Thanks. Dave

  • #2
    Originally posted by JerseyWelder View Post
    where can I get the gas receiver fitting that goes into the face of the machine as well as the clip to hold it in and the hose to connect to the solenoid? Thanks. Dave
    If it were me....

    I would probably look them up in the parts manual...

    then order them from Miller4Less....

    Parts manual Maxstar 200 Series

    http://www.millerwelds.com/om/t2226u_pt_mil.pdf

    Figure 11-3. Panel, Rear w/Components (Figure 11-1 Item 2) Page 124

    5 . . . . . . . . . . . . . . . . . . 193649 . . . . Ftg, Gas Barbed 1/4 TBG 5/8−18 Female . . . .. . . . . . 1


    Try Miller4Less $16.41

    http://miller4less.com/product_info....ducts_id=35769

    And the clip…

    601 . . . . . . . . . . . . . . . . 166560 . . . . Ring, Rtng Ext .500 Shaft X .042 Thk E Style Bowed . . . . . .

    $2.16

    http://miller4less.com/product_info....ducts_id=30996
    Last edited by H80N; 08-30-2013, 07:53 AM.
    .

    *******************************************
    The more you know, The better you know, How little you know

    “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

    Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

    My Blue Stuff:
    Dynasty 350DX Tigrunner
    Dynasty 200DX
    Millermatic 350P w/25ft Alumapro & 30A
    Millermatic 200

    TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

    Comment


    • #3
      Jersey - Although miller4less is the go to place for most, be advised they have a $10 shipping adder for orders under $100 and a small order charge of $7.95 for orders under $30 so factor that in as well. You can avoid one or both if you order other needed items at the same time to get the total up.
      MM200 w/spot controller and Spoolmatic 1
      Syncrowave 180 SD
      Bobcat 225G Plus LPG/NG w/14-pin*
      *Homemade Suitcase Wire Feeder
      *HF-251D-1
      *WC-1S & Spoolmatic 1
      PakMaster 100XL
      Marquette "Star Jet" 21-110
      http://www.millerwelds.com/images/sm...rolleyes.png?2

      Comment

      Working...
      X