Announcement

Collapse
No announcement yet.

millermatic 251 single phase ?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • millermatic 251 single phase ?

    I found a millermatic 251 single phase on a local forsale site with spool gun and mig gun with bottle gauges ready to go for 1500 obo

    Im pretty new to this and im not sure if single phase is good or not, if anyone can please help me out with an honest opinion on this machine

    I will be welding mosly 1/8 inch aluminum and steel with maybe some 1/2 inch here and there

    I need input asap please

    Thanks in advance to all!

  • #2
    Single phase is your normal house power.

    1500.00 is a good price for all of that.
    Ed Conley
    http://www.screamingbroccoli.net/
    MM252
    MM211
    Passport Plus w/Spool Gun
    TA185
    Miller 125c Plasma 120v
    O/A set
    SO 2020 Bender
    You can call me Bacchus

    Comment


    • #3
      Good price if it's in decent shape. Should be a 30a spool gun which brings about $600-700 by itself on ebay pretty consistently.
      MM250
      Trailblazer 250g
      22a feeder
      Lincoln ac/dc 225
      Victor O/A
      MM200 black face
      Whitney 30 ton hydraulic punch
      Lown 1/8x 36" power roller
      Arco roto-phase model M
      Vectrax 7x12 band saw
      Miller spectrum 875
      30a spoolgun w/wc-24
      Syncrowave 250
      RCCS-14

      Comment


      • #4
        Originally posted by 120reefermadnes View Post
        I found a millermatic 251 single phase on a local forsale site with spool gun and mig gun with bottle gauges ready to go for 1500 obo

        Im pretty new to this and im not sure if single phase is good or not, if anyone can please help me out with an honest opinion on this machine

        I will be welding mosly 1/8 inch aluminum and steel with maybe some 1/2 inch here and there

        I need input asap please

        Thanks in advance to all!

        I am pretty sure that single phase is the only machine choice on the 251.

        Griff

        Comment


        • #5
          Originally posted by griff01 View Post
          I am pretty sure that single phase is the only machine choice on the 251.

          Griff
          Yup up to 575 V ...Bob
          Bob Wright

          Spool Gun conversion. How To Do It. Below.
          http://www.millerwelds.com/resources...php?albumid=48

          Comment

          Working...
          X