Announcement

Collapse
No announcement yet.

weld on mcCormick CAN!!!!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • weld on mcCormick CAN!!!!

    I tried a dynasty 350 welder to try to tig it . it will work fine on 5 amps and 1/16"rod . The weld did not sink or burn through. Is there any applications for tig welding metal that small?

  • #2
    I previously tried the same thing with a thermal arc welder which bottoms out at 12 amps. the result is that the weld sunk. i looked back on the other side, it had no burn through but pushed through!!!!!!!

    Comment


    • #3
      Originally posted by jamesmg View Post
      I tried a dynasty 350 welder to try to tig it . it will work fine on 5 amps and 1/16"rod . The weld did not sink or burn through. Is there any applications for tig welding metal that small?
      That Dynasty is a wonderful machine....

      but what is a "mcCormick CAN" am unfamiliar with it...
      .

      *******************************************
      The more you know, The better you know, How little you know

      “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

      Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

      My Blue Stuff:
      Dynasty 350DX Tigrunner
      Dynasty 200DX
      Millermatic 350P w/25ft Alumapro & 30A
      Millermatic 200

      TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

      Comment


      • #4
        Originally posted by H80N View Post
        but what is a "mcCormick CAN" am unfamiliar with it...
        possibly a spice tin?? see here
        Tim

        Many cordless tools...........
        2 cordless hammers
        2 cordless punches
        1 cordless chisel
        2 cordless screwdrivers, 1 + and 1 -
        and a cordless adjustable wrench that also doubles as a hammer.....

        Comment


        • #5
          Mebbe...??

          but wonder if that is what the OP meant...??

          PICs..???

          Ya might find this interesting...

          Welding Razor Blades - Low amperage Tig Welding Tips .

          http://www.youtube.com/watch?v=WSi5eRTIOa4
          Last edited by H80N; 07-18-2013, 05:06 PM.
          .

          *******************************************
          The more you know, The better you know, How little you know

          “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

          Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

          My Blue Stuff:
          Dynasty 350DX Tigrunner
          Dynasty 200DX
          Millermatic 350P w/25ft Alumapro & 30A
          Millermatic 200

          TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

          Comment


          • #6
            Yea applications are out there. I have had a few, A 4-wheeler gas tank was so thin I had to let it burn back to have some thickness to start on.

            Oil tank cover on a bike. Mower muffler. It helps to have smaller filler wire. 1/16 can make you use more heat. I have used some .030 mig wire when needed.

            Comment

            Working...
            X