No announcement yet.

Dynasty 280 AC/DC Tig Welder

  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Aww.. No 115V? Dam! 200 it is I suppose.


    • #17
      Aircooled vs Watercooled models??

      Originally posted by Miller Welders View Post
      The Dynasty and Maxstar 280 air cooled models are currently in a nationwide rollout. We wanted to give you all an expedited notice of the release. Here are the product pages for details and specification.

      Dynasty 280 Series -
      Maxstar 280 Series -

      Thank you all for your support and dedication to the forums!

      Curious… as to the differences between the “Air Cooled Models” and the water cooled…

      Aside from the obvious addition of a water cooler… Coolmate 1.3…??

      There has been some talk about a new connector system.. that will allow Qwik Torch changes…??

      Maybe something like the “Euro Connector” for MIG guns??

      Originally posted by Shade Tree Welder
      Domestic rollout of air-cooled machines will begin on September 30 as the
      first day of order entry. This will be a nationwide, limited quantity rollout.
      Please expect lead times for these products and purchase orders will be
      processed in the order of which they are received. Contact your Miller Sales
      representative or customer service to receive the latest updates on lead
      Originally posted by Shade Tree Welder
      It is our recommendation that any customers who require a water-cooled
      system wait for the release of models that feature a Cooler Power™
      receptacle designed to power and operate the Coolmate™ 1.3 (the Coolmate
      1.3 would otherwise be required to plug into the facility 115V power). We will
      also be introducing complete water-cooled packages which include the
      Coolmate 1.3 and the Weldcraft® WP-280 torch. Please watch for future
      communications later in Q4 on the availability of machines with the Cooler
      Power feature and complete water-cooled packages.

      Any questions, contact Andrew Pfaller at 920-954-3616 or

      BTW.. the Dynasty 280 rollout was posted on SFT first... causing me to ask here...
      Last edited by H80N; 10-03-2013, 06:06 AM.

      The more you know, The better you know, How little you know

      “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

      Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

      My Blue Stuff:
      Dynasty 350DX Tigrunner
      Dynasty 200DX
      Millermatic 350P w/25ft Alumapro & 30A
      Millermatic 200

      TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000


      • #18
        Hopefully this welds smaw pipe better than the cst280 does. I previously owned a dynasty 200dx. Best tig welder available next to a bigger dynasty. I have been holding of buying another 200dx for the 280. However since using the cst280 on some 3inch natural gas line I am rethinking. Hopefully find one to try out before I plunk the coin down.