Announcement

Collapse
No announcement yet.

Could not leave well enough alone...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Could not leave well enough alone...

    Went a little crazy already this month ordered/received a Bernard "OXO" 12 foot, centerfire Mig gun for my 211. Then just to keep the 200 happy I ordered a CK FlexLoc Torch. I like the way "Tips and Tricks" used and talked about it on his last few videos. Got both from local AirGas shop - once again they matched on-line plus tax.
    Roger Troue

    Retired since 2004

    Miller 211
    Miller 200 Syncro
    Miller 375 Extreme

  • #2
    Originally posted by TxDarth View Post
    Went a little crazy already this month ordered/received a Bernard "OXO" 12 foot, centerfire Mig gun for my 211. Then just to keep the 200 happy I ordered a CK FlexLoc Torch. I like the way "Tips and Tricks" used and talked about it on his last few videos. Got both from local AirGas shop - once again they matched on-line plus tax.
    So what did you get for the 375?

    Comment


    • #3
      I was thinking about that FlexLoc this week, whishing I had one. Maybe one day, just have too many other tools waiting in line for now.

      Comment


      • #4
        Here's what keeps running through my mind. It won't happen until I hit the lotto.

        http://www.aircompressorsdirect.com/...ssor/i710.html

        Comment


        • #5
          oh yea, wouldn't that be sweet.

          I want a portable compressor. But thinking gas powered. Probably wont happen and just get an average electric for now.

          Comment


          • #6
            Originally posted by tackit View Post
            Here's what keeps running through my mind. It won't happen until I hit the lotto.

            http://www.aircompressorsdirect.com/...ssor/i710.html
            I would be over-joyed to have this one. I have a 60 gallon single stage that has done a good job, but while we're dreaming....

            http://www.aircompressorsdirect.com/...ssor/p707.html

            Comment


            • #7
              Hardrock A 30 gallon Honda powered compressor would be nice, having to low cfm to run tools is worse than having none.

              I have a 13 HP Honda motor on my pressure washer, that motor is 18 years old and still fires on the first pull after setting all winter, the only thing I have done to it in all these years is change the plug, oil and air filter, it's truly an amazing motor.

              Cope I have a 5HP 80 gallon compressor but I'm not thrilled with it, going the 7 1/2 HP route is a better choice. I want a 25 HP so I can sand blast, run 1" drive impacts and industrial needle scalers.

              I ruined my 1/2" drive CP impact trying to take a rear tire off a John Deere once, I didn't have enough tool or air to do the job.

              Comment


              • #8
                Originally posted by tackit View Post
                Hardrock A 30 gallon Honda powered compressor would be nice, having to low cfm to run tools is worse than having none.

                I have a 13 HP Honda motor on my pressure washer, that motor is 18 years old and still fires on the first pull after setting all winter, the only thing I have done to it in all these years is change the plug, oil and air filter, it's truly an amazing motor.

                Cope I have a 5HP 80 gallon compressor but I'm not thrilled with it, going the 7 1/2 HP route is a better choice. I want a 25 HP so I can sand blast, run 1" drive impacts and industrial needle scalers.

                I ruined my 1/2" drive CP impact trying to take a rear tire off a John Deere once, I didn't have enough tool or air to do the job.
                Mine runs my 1/2" Snap On impact and all of my other air tools no problem, but I just want a two stage unit. When I bought it, I could have had a two stage for not much more than I paid for the single stage, but there were political reasons for buying the one I have. After 23 years, the regulator has a leaky diaphragm; other than that, it has been trouble free.

                Comment

                Working...
                X