No announcement yet.

white face millermatic 35 wont arc!!

  • Filter
  • Time
  • Show
Clear All
new posts

  • white face millermatic 35 wont arc!!

    I bought this machine a few months ago and just got it powered up went an got gas and thought I was ready to play..... i was wrong. It has spoolmatic one conversion kit setup for aluminium and worked great when i bought it. I took the cover of and the relay clicks but does not pull the contactor together when i push the contactor together the spool gun arcs. the spool gun feeds wire and gas just no arc any information would be much apreciated.

    sincerely the newb..

  • #2
    So you'll need to determine if the relay contacts are bad or the contactor coil is bad.

    Unit SN?
    MM200 w/spot controller and Spoolmatic 1
    Syncrowave 180 SD
    Bobcat 225G Plus LPG/NG w/14-pin*
    *Homemade Suitcase Wire Feeder
    *WC-1S & Spoolmatic 1
    PakMaster 100XL
    Marquette "Star Jet" 21-110