Announcement

Collapse
No announcement yet.

welding blade pivot ball on dozer

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • welding blade pivot ball on dozer

    i am replacing pivot ball on dozer blade. Is there any rod to use that would be better than another? planning on running 1/8 7018. i have a trailblazer 302 and 12vs suitcase i could use but have more clean up and set up time . i thought mabye stick would be faster. any tips or ideas

  • #2
    7018 would be fine. Nothing special about them.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment


    • #3
      up or down

      7018 better running up hill or down hill?

      Comment


      • #4
        welding blade pivot ball on dozer

        Usually better running uphill, downhill is possible but can be tougher because of slag if you don't move fast enough.

        Comment


        • #5
          Maybe if you have to ask?

          7018 uphill. Don't know the dozer size but if using 1/8 rod probably 3 passes all around.
          MM250
          Trailblazer 250g
          22a feeder
          Lincoln ac/dc 225
          Victor O/A
          MM200 black face
          Whitney 30 ton hydraulic punch
          Lown 1/8x 36" power roller
          Arco roto-phase model M
          Vectrax 7x12 band saw
          Miller spectrum 875
          30a spoolgun w/wc-24
          Syncrowave 250
          RCCS-14

          Comment


          • #6
            welding blade pivot ball on dozer

            Run NR232... It's strong and won't crack from impact.. The last ones I did I used L-56 Lincoln wire with 75/25 mix and they have held with out any problems

            Comment

            Working...
            X