Announcement

Collapse
No announcement yet.

Bobcat won't start

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bobcat won't start

    I have a Miller Bobcat 225NT with an Onan engine that won't start. One day everything was fine the next day I went to start it and nothing. The battery is good and charged. I Have checked a fuse that is near the starter and its good. But it doesn't crank....nothing. Any ideas on how I can trace the problem. Can I bypass the switch and see if its that? Any recommendations?

  • #2
    Corroded engine harness plug, mounted on the baffle , just follow the harness from the starter back towards the front.

    Comment


    • #3
      Originally posted by cruizer View Post
      Corroded engine harness plug, mounted on the baffle , just follow the harness from the starter back towards the front.
      Is it usually something can be cleaned or typically replaced?

      Comment


      • #4
        Sometimes a mere cleaning will fix it, most of the time however, you'll have to jumper wires around it.

        Comment


        • #5
          Originally posted by cruizer View Post
          Sometimes a mere cleaning will fix it, most of the time however, you'll have to jumper wires around it.
          Thanks I'll let you know how it goes.

          Comment


          • #6
            Just had to clean it up and its starting and running fine. Thanks for the help!

            Comment

            Working...
            X