Announcement

Collapse
No announcement yet.

Schoolmate 200 what is it worth

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Schoolmate 200 what is it worth

    I came across a spoolmate 200 gun and the miller power unit I am wondering what kind of money its worth obviously it is used

  • #2
    What power source?

    Comment


    • #3
      Schoolmate 200 what is it worth

      Just says miller spoolmate 200 on front of Power source

      Comment


      • #4
        Schoolmate 200 what is it worth

        http://rasmuscatalog.com/cgi-bin/mnlist.cgi?rasmus796/10804 Same power unit

        Comment


        • #5
          Schoolmate 200 what is it worth

          Anyone ???

          Comment


          • #6
            Schoolmate 200 what is it worth

            No one knows ?

            Comment


            • #7
              Looks like an early version of the Regency which was a very good spool gun power source.

              Comment


              • #8
                It's basically a Millermatic 200 without the built-in wire feeder but used with the Spoolmatic 1 spool gun.

                However, it's also capable of being set up with a separate wire feeder (such as a Millermatic 30A) to make it a great all around MIG machine.

                Its actual value would depend on what a potential buyer was looking for but with just the Spoolmatic 1 spool gun I would estimate the combination to be worth between $5-700. IMO.
                MM200 w/spot controller and Spoolmatic 1
                Syncrowave 180 SD
                Bobcat 225G Plus LPG/NG w/14-pin*
                *Homemade Suitcase Wire Feeder
                *HF-251D-1
                *WC-1S & Spoolmatic 1
                PakMaster 100XL
                Marquette "Star Jet" 21-110
                http://www.millerwelds.com/images/sm...rolleyes.png?2

                Comment


                • #9
                  Schoolmate 200 what is it worth

                  Thanks guys

                  Comment


                  • #10
                    Got any photos? Condition plays a roll in its value as well.
                    MM200 w/spot controller and Spoolmatic 1
                    Syncrowave 180 SD
                    Bobcat 225G Plus LPG/NG w/14-pin*
                    *Homemade Suitcase Wire Feeder
                    *HF-251D-1
                    *WC-1S & Spoolmatic 1
                    PakMaster 100XL
                    Marquette "Star Jet" 21-110
                    http://www.millerwelds.com/images/sm...rolleyes.png?2

                    Comment


                    • #11
                      Duane,I was told that the Millermatic 200 and Regency were "the same power source", how close to fact is that?

                      Comment


                      • #12
                        Spot on.

                        The difference between the Spoolmate 200 and Regency is the Regency is equipped with the current Miller standard 14-pin for connecting any like equipped separate remote feeder. The Spoolmatic 3 spool gun would be a direct connect to the Regency same as the SM-1 is for the Spoolmate 200.
                        MM200 w/spot controller and Spoolmatic 1
                        Syncrowave 180 SD
                        Bobcat 225G Plus LPG/NG w/14-pin*
                        *Homemade Suitcase Wire Feeder
                        *HF-251D-1
                        *WC-1S & Spoolmatic 1
                        PakMaster 100XL
                        Marquette "Star Jet" 21-110
                        http://www.millerwelds.com/images/sm...rolleyes.png?2

                        Comment

                        Working...
                        X