Announcement

Collapse
No announcement yet.

DVI2 Help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • DVI2 Help

    Picked up a DVI2 welder, using gasless wire and not for sure how to change polairty for gasless, picture attached of how its wired now.Name:  01b2369bb1fed5ca5f4d7025dd7c7fc3.jpg
Views: 1
Size:  56.0 KB

  • #2
    The short wire should stay on that stud and the long wire should be on the red stud. If you switch to gas you'll need to change them. Where it is now you won't be able to weld.
    MillerMatic 251
    Maxstar 150 STH
    Cutmaster 42
    Victor Journeyman OA

    A rockcrawler, er money pit, in progress...

    Comment


    • #3
      Originally posted by elvis View Post
      The short wire should stay on that stud and the long wire should be on the red stud. If you switch to gas you'll need to change them. Where it is now you won't be able to weld.
      Thanks much, i will change it tonight and give it a try.

      Comment

      Working...
      X