Announcement

Collapse
No announcement yet.

econo twin hf help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • econo twin hf help

    hi my name is zach i'm looking for a little help. i got a miller econo twin hf from a buddy for free and the only thing it is missing is the HF switch. I'm looking for somebody that can point me in a direction to purchace the switch or the instuctions to build one. The socket for the HF switch is a three wire and im told the switch is a on/off used for aluminum welding. my serial number on the welder is hf866259 if that helps. i will post pics of it also if i can figure out how. thanks everybody, Zach

  • #2
    Maybe try miller4less.com. Seen that posted here a couple times for replacement parts. Good luck with the new welder.

    Comment


    • #3
      Go to www.cyberweld.com type in the part number and they should have it. If they dont Airgas can usually get parts in within 3-5 days.

      Comment


      • #4
        Originally posted by zach 318 View Post
        hi my name is zach i'm looking for a little help. i got a miller econo twin hf from a buddy for free and the only thing it is missing is the HF switch. I'm looking for somebody that can point me in a direction to purchace the switch or the instuctions to build one. The socket for the HF switch is a three wire and im told the switch is a on/off used for aluminum welding. my serial number on the welder is hf866259 if that helps. i will post pics of it also if i can figure out how. thanks everybody, Zach
        Hi Zach,
        Yes post some pics.
        I bought one a few weeks ago as well, but I can't seem to find the Ser.#, where did you locate yours ?
        Are you talking about the Toggle switch on the front, or about the remote receptical on the front, that leads up to the torch on/off HF. button ?

        ...........Norm
        - Arcair- K 4000 CAC.
        - LN - 25
        - Lincoln Ranger 8
        -DeWalt Compressor

        www.normsmobilewelding.blogspot.com

        Comment


        • #5
          hi norm my serial no is located directly above the AC/DC select switch.

          the switch i was looking for was the one from the receptical on the front that leads up the torch for the on/off for the HF. i down loaded a manual from miller and opened my welder up and it looked easy enough to make one so i built a switch with a momentary on off foot switch and the male plug in from platt electic it cost about $60 for the switch,plug, and cord.

          i will try again to get the pics up.

          Comment


          • #6



            Comment


            • #7
              Zach, Thanks a lot !
              Mine looks the same, except mine is all black on the front.
              No wonder why I couldn't find the serial # on mine, it's covered up by a saftey sticker....... lol.

              ...........Norm
              - Arcair- K 4000 CAC.
              - LN - 25
              - Lincoln Ranger 8
              -DeWalt Compressor

              www.normsmobilewelding.blogspot.com

              Comment

              Working...
              X