Announcement

Collapse
No announcement yet.

Hobart Handler 140 .023 roller part #?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hobart Handler 140 .023 roller part #?

    Hey guys. I just bought my bro a gas bottle and .023 wire for his new Hobart Handler from Tractor Supply. I know these machines are essentially a millermatic 140 machine but made a bit cheaper. Does anyone know the part number for the drive roller for .023 solid wire? Thanks. Dave

  • #2
    Should come with a combination .023-.030/0.35 roller. You just flip it around to go from .023 to larger wire. If it has a feed roller, it's probably the right one. You can download the manual here.

    http://www.hobartwelders.com/om/0900/o925f_hob.pdf older model w/4 taps

    uses 202 295

    http://www.hobartwelders.com/om/6digit/o258267a_hob.pdf new model with 5 taps

    uses 037 338
    Last edited by cope; 04-07-2013, 07:30 AM.

    Comment


    • #3
      http://www.millerwelds.com/om/t225716g_pt_mil.pdf
      18 . . . . . . . . . . . . . . . 220 179 . . ROLL, feed .024, .030/.035 .

      Doesn't your roll have 2 grooves? One side for the .023 and the other for .030-.035?...Bob
      Bob Wright

      Spool Gun conversion. How To Do It. Below.
      http://www.millerwelds.com/resources...php?albumid=48

      Comment


      • #4
        Originally posted by aametalmaster View Post
        http://www.millerwelds.com/om/t225716g_pt_mil.pdf
        18 . . . . . . . . . . . . . . . 220 179 . . ROLL, feed .024, .030/.035 .

        Doesn't your roll have 2 grooves? One side for the .023 and the other for .030-.035?...Bob
        Bob, is that a Miller PN? The ones I found at Hobart are different numbers.

        Comment


        • #5
          Originally posted by cope View Post
          Bob, is that a Miller PN? The ones I found at Hobart are different numbers.
          Yes it is...Bob
          Bob Wright

          Spool Gun conversion. How To Do It. Below.
          http://www.millerwelds.com/resources...php?albumid=48

          Comment


          • #6
            The new 140s come with an .030/035 drive roll

            .o30 for solid wire
            .035 for fluxcore

            Drive roll chart

            http://www.hobartwelders.com/product...0-187-210.html
            Ed Conley
            http://www.screamingbroccoli.net/
            MM252
            MM211
            Passport Plus w/Spool Gun
            TA185
            Miller 125c Plasma 120v
            O/A set
            SO 2020 Bender
            You can call me Bacchus

            Comment


            • #7
              This....the .035 side is a toothed groove while the .030 side is smooth...I think I ordered the right one from cyberweld today.....we shall see.....seems the miller rolls are narrower than the hobart?
              Originally posted by Broccoli1 View Post
              The new 140s come with an .030/035 drive roll

              .o30 for solid wire
              .035 for fluxcore

              Drive roll chart

              http://www.hobartwelders.com/product...0-187-210.html

              Comment


              • #8
                Originally posted by turbo38t View Post
                This....the .035 side is a toothed groove while the .030 side is smooth...I think I ordered the right one from cyberweld today.....we shall see.....seems the miller rolls are narrower than the hobart?
                Hopefully you ordered a Hobart roller. The Miller may well be a different part.

                Comment

                Working...
                X