Announcement

Collapse
No announcement yet.

MM211 o-rings

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • MM211 o-rings

    I have a MM211 and I change between the spool gun and the standard gun. It's a tight fit going into the welder. I noticed today one of the o-rings was torn. Is there any recommendations for lube on these o-rings?

  • #2
    I have used the Syncolon on O-Rings.

    http://www.amazon.com/Synthetic-Grea.../dp/B000XBH9HI

    http://www.amazon.com/O-Ring-Silicon.../dp/B002KTJF2S

    Comment


    • #3
      Loctite brand Silicone Lubricant (their part number is 51360) may be just what you need...that number is for a 5.3 ounce tube and is something I keep in my toolbox for use on rubber stuff that needs some kind of slickum on it.
      Don J
      Reno, NV

      Never pick a fight with an old guy. Old guys are too smart to fight and get hurt. They'll just kill you and get it over with.

      Comment


      • #4
        Use a very thin coat of high-quality silicone grease like NAPA Sil-Glyde, Ford Caliper/Dielectric, or Ford Electrical.

        .

        I also use it on my bottle fittings to help prevent tiny leaks & prevent corrosion/seizing.
        Walk softly & carry a BIG SIX ! ! !
        MM211 + SM100

        Comment


        • #5
          MM211 o-rings

          Great input, thanks guys.

          Comment

          Working...
          X