No announcement yet.

Miller matic 200 87year

  • Filter
  • Time
  • Show
Clear All
new posts

  • Miller matic 200 87year

    Hello all im having a problem with my machine it feeds steel wire good. But when i switch to stainless roll same size wire. I have a new gun and lead. Its like the roll winder isnt keeping up withe the rollers? Any help would be appreciated.
    thanks jake

  • #2
    Steel wire is hard and has a copper coating for lubricity while feeding, but can load up the liner with shavings. SS wire is very soft and tends to gall or drag in the liner.

    Blow out your liner and try again. Increasing tension the v rollers more could deform the wire so be careful. If all else fails you might try putting the u groove rollers on and increasing the roller tension much more.

    Good Luck
    Nothing welded, Nothing gained

    Miller Dynasty700DX
    3 ea. Miller Dynasty350DX
    Miller Dynasty200DX
    ThermalArc 400 GTSW
    MillerMatic200 with spoolgun
    Lincoln SP-170T
    Linde UCC305 (sold 2011)
    Hypertherm 1250
    Hypertherm 800
    PlasmaCam CNC cutter
    Fadal Toolroom CNC Mill
    SiberHegner CNC Mill
    2 ea. Bridgeport
    LeBlond 15" Lathe
    Haberle 18" Cold Saw
    Doringer 14" Cold Saw
    6 foot x 12 foot Mojave granite