Announcement

Collapse
No announcement yet.

Spectrum 375 w/ ICE-25C

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Spectrum 375 w/ ICE-25C

    Can anyone tell me if the swirl ring and retaining cup for the ICE-25C are interchangeable with the ICE-27C?

    I need to freshen up my ICE-25C and the numbers currently listed for those two parts is different than the manual. I'm guessing that Miller just eliminated the older part numbers and went with the numbers for the ICE-27C, but would like to make sure before I spend the $$$.

    Any info would be greatly appreciated.

    Thanks.

    Dave

  • #2
    Both parts will fit but better to get the right one as they look different.

    Ji
    Grip it and Rip it

    Comment


    • #3
      Originally posted by Jigantor View Post
      Both parts will fit but better to get the right one as they look different.

      Ji
      I hear ya', but it's easier said than done with a few of the parts for this older torch.

      We purchase cylinder gases from Praxair for instrumentation use in the lab I work in; I guess I'll call our account manager (who doubles as the counter guy at the local store) and see if I can get him to give me info and/or a deal.

      Thanks.

      Comment


      • #4
        Spectrum375 with ICE-25C torch

        Swirl ring current part number is 202809 and retaining cup is 202808. These parts will work on both the ICE-27C and the ICE-25C
        Tim Lux
        Service and Aplications Specialist
        Miller Electric Mfg. Co

        Comment


        • #5
          Originally posted by plasmaman View Post
          Swirl ring current part number is 202809 and retaining cup is 202808. These parts will work on both the ICE-27C and the ICE-25C
          I finally found a reference somewhere on the Miller website that indicated the same, so I pulled the trigger (pun intended) and bought a kit with those part numbers included.

          Thanks for confirming that I made the correct decision, Tim.

          Dave

          Comment

          Working...
          X