Announcement

Collapse
No announcement yet.

Portable for Portable

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hardrock40
    started a topic Portable for Portable

    Portable for Portable

    A situation as I see it would be to have the trailer towed as close as possible but then have to carry everything from it. So I'm thinking about a wagon type cart for the welder, gas bottles, hood and grinders etc.

    Then use this type of cart to roll everything back into a more secure building instead of leaving everything in the trailer at the end of the day.

    So I am looking at making one of these work.

    http://www.tractorsupply.com/en/stor...-lb-pro-series

    I doubt I could buy wheels and metal that cheep and just add whatever I need to make it hold enough supplies.

    The main power I haven't got yet, would stay in the trailer, maybe unless it ends up with wheels also.

    Anybody do this type of thing? Whats your thoughts on it?

  • tackit
    replied
    I've always wanted to buy an old Ford Ranger or Chevy S10 and make it into a flatbed, put a gas drive on it, something small for on the property and to help my farm neighbors out.

    Leave a comment:


  • Broccoli1
    replied
    Originally posted by Hardrock40 View Post
    I just sit the fire extinguisher there, don't know if I would be carrying that one. It holds a good bit of water but a little red dry chemical maybe better and have the larger close by.

    I like the idea of a cage but why can't you pull two swivel wheels in the front with a handle long enough so you don't run over your heels? if I cage it, I can push or pull. I guess your stating the standards, thanks.

    Its 31" wide 48" long. Should fit through most doors, mine anyway.

    Thanks again for the ideas
    If you have a long handle like a wagon then yes but the wheel geometry works a little differently , but for carts with swivel castors usually much easier to steer the cart by pushing.

    Leave a comment:


  • Hardrock40
    replied
    Originally posted by Broccoli1 View Post
    The Fire Extinguisher is going to bounce out of the cart traveling down the road and wreak havoc inside your trailer.

    I would suggest a Roll cage-(Square or round tubing) around the cart- as it sits there is no way to strap it to the side of the Trailer wall.

    Just FYI on carts:
    with 2 swivel wheel you push
    with 4 swivel wheels you pull.

    You didn't post up a pic of the handle but I would make the handle at the rear of the cart, which will require you to move the swivel wheels to the rear also.

    Hard to tell the dimensions but make sure it fits through a standard door- if you see yourself working inside somewhere.
    I just sit the fire extinguisher there, don't know if I would be carrying that one. It holds a good bit of water but a little red dry chemical maybe better and have the larger close by.

    I like the idea of a cage but why can't you pull two swivel wheels in the front with a handle long enough so you don't run over your heels? if I cage it, I can push or pull. I guess your stating the standards, thanks.

    Its 31" wide 48" long. Should fit through most doors, mine anyway.

    Thanks again for the ideas

    Leave a comment:


  • Broccoli1
    replied
    The Fire Extinguisher is going to bounce out of the cart traveling down the road and wreak havoc inside your trailer.

    I would suggest a Roll cage-(Square or round tubing) around the cart- as it sits there is no way to strap it to the side of the Trailer wall.

    Just FYI on carts:
    with 2 swivel wheel you push
    with 4 swivel wheels you pull.

    You didn't post up a pic of the handle but I would make the handle at the rear of the cart, which will require you to move the swivel wheels to the rear also.

    Hard to tell the dimensions but make sure it fits through a standard door- if you see yerself working inside somewhere.

    Leave a comment:


  • Hardrock40
    replied
    Originally posted by shovelon View Post
    I like that.
    Thanks, I put the handle on today. Can't make up my mind where to mount the welder. I can stand on the corners, it doesn't tip. Just seems weird to have it in a corner but that opens up more bed room.


    Thinking about a rail across the back maybe a couple feet high to hang grinders and things from.

    Anybody have any suggestions as to what add ons would be beneficial?

    Leave a comment:


  • shovelon
    replied
    Originally posted by Hardrock40 View Post
    Decided to make a cart instead, first one so its kind of a do as I go thing. Not finished but will hold way more weight than the tires will allow.
    I like that.

    Leave a comment:


  • Hardrock40
    replied
    Making a cart

    Decided to make a cart instead, first one so its kind of a do as I go thing. Not finished but will hold way more weight than the tires will allow.
    Attached Files

    Leave a comment:


  • Hardrock40
    replied
    Originally posted by Broccoli1 View Post
    Photo equipment rental business is the main gig- all this welding stuff is a hobby.

    It certainly has paid for itself with stuff around the shop though
    That sounds like a good business to be in. I couldn't put a camera down for a year but I have to get this welding thing set up so my time is limited for photos. Love it tho.

    Today I realized that a cart is a must have for me. I have gravel around here and a guy brought by a utility trailer with the expanded metal breaking loose.

    Anyway I had to hand carry everything to the front of the house and that thing has some weight to it. 1 trip for the 211, 1 for the gas and another for the accessories. Took as long as the job and was twice as hard. PITA

    Makes me want to call in sick and work on a cart today.

    Leave a comment:


  • cope
    replied
    Originally posted by BD1 View Post
    I have one similar from harbor freight . Check it out in person first if possible. The one i have was cheap when I bought it, 50.00. Problem is the narrow span on the wheels in width. It isn't real stable but never had it tip over. there are some nice carts for landscaping use that are nicer. Problem is that nicer and stable means more money.
    Last week HF had the car on sale for $29.99, now it is $49.99. The only thing I did was buy a set of metal BB wheels. It is not a heavy duty cart, but it works. I bought it to mount my tig and plasma. I like the design enough that I may make a heavier duty version of it from scratch.


    http://www.harborfreight.com/welding...cessories.html

    Leave a comment:


  • Broccoli1
    replied
    Photo equipment rental business is the main gig- all this welding stuff is a hobby.

    It certainly has paid for itself with stuff around the shop though

    Leave a comment:


  • Hardrock40
    replied
    MMW, I have an 80 size mix I was planning to take around and another 80 with argon for tig. I never thought of extending the gas line and leaving the bottles in the trailer. Thats something to really consider, thanks.

    I've been thinking on trailer setup. Looking at different hangers/ tie downs and how to mount them. Still pondering on power, A new Bobcat will be the choice if a nice used engine drive doesn't surface.

    BD1, I looked at the HF cart today, was 72 dollars. The one in the link is in the box at the store and I can't tell much about it.

    Broc, you got a lot of things going on, photography too? I started laying out a cart today, twice honey came by and said just buy one. Even then it would need some work. Makes me think about selling my 100-400L.

    As of now, I still like the wagon cart idea. I'm in no hurry but that's what I said about an enclosed trailer and here it sits.

    Leave a comment:


  • Broccoli1
    replied
    My business entails lots of carts for the gear and I would build a custom cart for your needs.

    Are you going to be working out of an enclosed trailer?

    They are nice because you can strap your cart to the Wall

    If you use an open trailer I think I would want an enclosed cart, knack box on wheels, or like a roadie case so that the gear is covered while driving.

    I don't know the size of job boxes but whatever you decide it's gotta fit through a door
    Last edited by Broccoli1; 03-11-2013, 03:29 PM.

    Leave a comment:


  • BD1
    replied
    I have one similar from harbor freight . Check it out in person first if possible. The one i have was cheap when I bought it, 50.00. Problem is the narrow span on the wheels in width. It isn't real stable but never had it tip over. there are some nice carts for landscaping use that are nicer. Problem is that nicer and stable means more money.

    Leave a comment:


  • MMW
    replied
    Onto your original question about the cart. It looks like the cart would work for transporting stuff. I would skip the idea of putting bottles on it except maybe a small 75/25 for mig. It's much easier to have your bottles mounted securely in the trailer & use a long enough hose. For other items then you can just pile them in the wagon & remove them easy enough. I honestly don't think you need it at a job site though but I don't know what kind of areas you'll be working in.

    For example, show up to weld something. You'll need a + & - lead, a stinger or feeder, ext. cord, maybe oxy/acet, gas for mig maybe. These are all tied to your power source/trailer anyway so the wagon won't help much. Helmet, gloves, grinder, rods, wire brush, chipping hammer. These can be carried in one trip or a bucket.

    I would set up your trailer & see how it goes. You can change things on the fly if certain things become time wasters/pain in the a.

    Leave a comment:

Working...
X