Announcement

Collapse
No announcement yet.

Any New Jersey shops have an aluminum hookup?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Any New Jersey shops have an aluminum hookup?

    I'm looking to buy a 4x8 sheet of 3/16" 3003 aluminum plate and a 4x8 sheet of 1/8" 3003 aluminum. Anyone have any or know of a good shop to deal with near the Jersey shore. I usually use Ed's Trading Post but won't have time to call til tomorrow and honestly would like to find someone closer. Thanks. Dave

  • #2
    Joseph Fazzio Inc is where I go to get my metal pieces.

    They have a location in Glassboro and Farmingdale.

    http://www.shopjfi.com



    Joseph Fazzio, Incorporated (Main Facility)
    2760 Glassboro-Cross Keys Rd.
    Glassboro, New Jersey 08028
    Phone: (856) 881-3185 | Fax: (856) 881-0214 | Fax (Accounting): (856) 881-6321
    Products: Steel & Metals, Industrial Hardware, Fasteners, Construction Equipment, & Surplus
    Services: Sawcutting, Shearing, Punching, Bend Forming, Shot Blasting, Computerized Flame & Plasma Cutting
    Hours: Monday thru Friday: 8:00 am to 5:00 pm, Saturday: 8:00 am to 12:00 pm, Sunday: Closed



    Steel & Metal Liquidators, LLC
    407 Old Airport Rd.
    New Castle, DE 19720
    Phone: (302) 322-9960 | Fax: (302) 322-9961
    Products: Steel & Metals, Industrial Hardware, Fasteners, Construction Equipment, & Surplus
    Hours: Monday thru Friday: 7:30 am to 4:00 pm, Saturday: 8:00 am to 12:00 pm, Sunday: Closed


    Joseph Fazzio - Wall, LLC
    5001 Routes 33 & 34 (at Circle)
    Farmingdale, New Jersey 07727
    Phone: (732) 938-5501 | Fax: (732) 938-5502
    Products: Steel & Metals, Industrial Hardware, Fasteners, Construction Equipment, & Surplus
    Hours: Monday thru Friday: 7:30 am to 4:30 pm, Saturday & Sunday: Closed


    Joseph Fazzio - Pottsville, LLC
    1584 Bunting St.
    Pottsville, PA 17901
    Phone: (570) 391-0141 | Fax: (570) 399-5180
    Products: Steel & Metals, Industrial Hardware, Fasteners, Construction Equipment, & Surplus
    Hours: Monday thru Friday: 7:30 am to 4:30 pm, Saturday: 7:00 am to 12:00 pm, Sunday: Closed
    Miller Dynasty 350, Dynasty 210 DX, Hypertherm 1000, Thermal Arc GTSW400, Airco Heliwelder II, oxy-fuel setup, metal cutting bandsaw, air compressor, drill press, etc.

    Call me the "Clouseau" of welding !

    Comment


    • #3
      Any New Jersey shops have an aluminum hookup?

      I use R S Phillips in Vernon NJ, prices are a little high, it's only a mile or so from my house though. They are also a full feb shop and supplier. They do all the sheering and bending I need.

      Comment


      • #4
        Samson Metals in Cranbury, NJ. Don't know if they are competitive or not.

        http://www.sam-metals.com/
        MM250
        Trailblazer 250g
        22a feeder
        Lincoln ac/dc 225
        Victor O/A
        MM200 black face
        Whitney 30 ton hydraulic punch
        Lown 1/8x 36" power roller
        Arco roto-phase model M
        Vectrax 7x12 band saw
        Miller spectrum 875
        30a spoolgun w/wc-24
        Syncrowave 250
        RCCS-14

        Comment


        • #5
          Fazzio's in Wall Twp. 732 938 5501

          Comment


          • #6
            I use Fazzio's right on the 33/34 circle
            Multimatic 200 w/ Tig kit & Spoolgun
            Victor Torch
            Accumulating as I go

            Comment


            • #7
              Thx guys. Ended up using Perlin Steel in Newark. $275 for a 5x10 sheet of 1/8" 3003 sound decent?
              Originally posted by Hammer65 View Post
              I use Fazzio's right on the 33/34 circle

              Comment


              • #8
                Change that....Perlin was very helpful but couldn't get the sheet in time. I ended up using Edward's trading post which I have used many times before in Great Meadows, NJ. They stock plate aluminum. I picked up a sheet of 5000 1/8 alu, sheeet of 3/16 5000 alu....and 1 sheet of 11 gauge steel.....alll 4 x8 sheets.....$519 out the door....
                Originally posted by turbo38t View Post
                Thx guys. Ended up using Perlin Steel in Newark. $275 for a 5x10 sheet of 1/8" 3003 sound decent?

                Comment

                Working...
                X