Announcement

Collapse
No announcement yet.

diversion 165

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • diversion 165

    gotta be quick here, tried to change tungston size today, the collet is too big, the book does not mention any thing about this, am i missing some thing here or do i go to lws again, i bought the tungston at the same lws as i bought the welder, no mention on their part

  • #2
    Yup, you need to size the collet to the diameter of the tungsten. Part of the learning process.
    Last edited by Goodhand; 03-01-2013, 01:14 AM.

    Comment


    • #3
      As well as the collet body and/or gas lense.
      2- XMT's 350 cc/cv
      1- Blue star 185
      1- BOBCAT 250
      1- TRAILBLAZER 302
      1- MILLER DVI
      1- PASSPORT PLUS
      1- DYNASTY 200 DX
      1- MAXSTAR 150 STL
      1- HF-251 BOX
      1- S-74d
      1- S-75DXA
      2- 12-RC SUITCASES
      1- 8-VS SUITCASE
      2- 30 A SPOOLGUNS

      Comment


      • #4
        The Diversion 165 comes with a collet for 3/32 tungstens. That's probably what you should ask for.
        CG
        Old Miller Swinger 180 Buzzbox
        Miller Diversion 165
        1945 Craftsman Atlas Lathe
        Smithy Lathe/Mill

        Comment


        • #5
          And don't buy budget brand chinese soft copper parts. Ask for genuine weldcraft parts.

          I like the Weldtec brand myself. Like all the good parts, they use tellurium copper alloy to make thiers.
          Nothing welded, Nothing gained

          Miller Dynasty700DX
          3 ea. Miller Dynasty350DX
          Miller Dynasty200DX
          ThermalArc 400 GTSW
          MillerMatic350P
          MillerMatic200 with spoolgun
          MKCobraMig260
          Lincoln SP-170T
          Linde UCC305 (sold 2011)
          Hypertherm 1250
          Hypertherm 800
          PlasmaCam CNC cutter
          Fadal Toolroom CNC Mill
          SiberHegner CNC Mill
          2 ea. Bridgeport
          LeBlond 15" Lathe
          Haberle 18" Cold Saw
          Doringer 14" Cold Saw
          6 foot x 12 foot Mojave granite

          Comment


          • #6
            thank you for your answers, i was wondering why there was a need for a different collet, after looking at the collet, the manufacturer could of made a one size fits all, but thats the way it is i guess, and much agree on chinese junk, there is no place for that crap in my shop, people think that they save big money buying import crap

            Comment


            • #7
              After I got my 165 I bought a kit from Arc-Zone.com that had all of the assorted bits I'm ever likely to need. It's an AK2-pro for the WP-17 torch. I'm well pleased with the assortment that allows me to experiment and learn without a thousand trips to the supply store.

              I think this is the link http://www.arc-zone.com/index.php?ma...oducts_id=3586
              Last edited by GT6Steve; 03-02-2013, 12:59 PM.
              Miller Diversion 165
              1966 Bridgeport Mill
              Leblond 15x 35 Regal Servoshift lathe
              Solberga SE 1425 Drill Press
              Bigass Bandsaw
              Hydraulic press
              small surface grinder
              Belt sander
              Tons of grinders and hand tools
              Knife edge Balancing rollers
              Heat and AC in the garage

              Jags and racing Triumphs

              Comment

              Working...
              X