Announcement

Collapse
No announcement yet.

Millermatic has a loose wire

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Millermatic has a loose wire

    Black wire off the drive motor isnt plugged in anywhere. Ive looked all through owners manual for a clue. Schematics i have dont show. Any help would be greatly appreciated. P.S. This is my first post on this forum!

  • #2
    A millermatic what?, there are many, a serial# to pull up the correct diagram would be handy too

    Comment


    • #3
      Millermatic 35. Serial number JH212708.

      Comment


      • #4
        They both wind up at CR1 relay. one goes to a brake resistor (stops the drive from turning once the gun trigger is released) Normally closed portion of CR1 relay

        The other goes to the Normally open part of CR1 relay, once energised the motor turns.

        Comment

        Working...
        X