If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Any chance this is the chevy pump rub issue? If so i got mine fixed just with some jb weld and a spacer plate. Been solid for over a year now
Did you do the merchant auto kit? How bad of a leak did your case have? Do you actually have to remove the case from the truck because it won't clear the crossmember that is right behind it? I've got an 06 lbz and I'll need to do this soon...
Maxstar 150 STH
Victor Journeyman OA
yea a guy brought it 3 bb size holes at out put shaft side in the locking notch's said chevy would not honor the fix. yeah has to be out to fix to clean oil out heated it with a small propane torch and wire brushed it clean welded good
I believe the mechanic did pull the case off. Had to to intall a spacer plate inside so it quits rubbing. Mine was caught during an oil change and it must have just poked through. Maybe a diameter of 1/8 if that.