Announcement

Collapse
No announcement yet.

Syncrowave 351.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Syncrowave 351.

    I have recently acquired 2 syncrowave 351 machines. Neither have the pulse and sequencer or soft start features. My question is can these features be added? I plan on removing my syncro 200 and selling it. I don't like the way it pounds on when I need a delicate start. I don't tig nothing other than aluminum and after a lesson learned that the 200 wasn't up to the task I bought these 351s. I can't swing a new 350 lx so did I make a mistake? Thanks a bunch
    Syncrowave 350lx
    XMT 350 CC/CV
    S74DX Feeder
    30a spoolgun
    Hypertherm 1000 g3
    Harris O/A
    Cincinnati lathe
    Acer Ultima "Bridgeport Mill"
    340hp Quincy and 400 gallon of air
    Other doodads and a stoker coal stove

  • #2
    opted for a a 350lx

    I decided to go ahead with the 350lx. Is a newer machine (2005) and it has the options I wanted on it. Now hopefully it operates correctly. Thanks to everyone that viewed.
    Syncrowave 350lx
    XMT 350 CC/CV
    S74DX Feeder
    30a spoolgun
    Hypertherm 1000 g3
    Harris O/A
    Cincinnati lathe
    Acer Ultima "Bridgeport Mill"
    340hp Quincy and 400 gallon of air
    Other doodads and a stoker coal stove

    Comment


    • #3
      surprisingly, nobody responded...

      I am very curious why no one had a comment or an opinion on the synchrowave 351.

      I was tempted by one lately in the ads and was expecting some hints from answers you might get.

      Were they lemons? too pricey? bad reputation? hard to set-up?

      Comment


      • #4
        I don't know about the older Syncrowaves but my newer model has a feature called "Syncro-Start" that allows you to choose among 3 arc starting modes - soft, medium and hot (or something like that).

        Have you looked at the manual for yours to see if it has that feature?

        Comment

        Working...
        X