Announcement

Collapse
No announcement yet.

Miller Multimatic 200

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • HomerJSapien
    started a topic Miller Multimatic 200

    Miller Multimatic 200

    Hi everyone. I'm in my 60's, retired and pretty new to welding. Been following the site for a while and I have a question that I'm sure I can get an answer to here. I started learning how to weld about 10 months ago. I bought a Hobart Handler 140 and an Everlast Powerarc 160STH (I know, but the price was right and it's actually a pretty good machine). I wanted to learn Mig, Tig & Stick, hence the 2 machines. I just recently sold the HH 140 because I wanted the 115/230v feature of the HH210 (the Everlast has this feature) as I do have a 230v/50a outlet in my garage. I haven't gotten a chance to use the 210 yet, but now I'm really leaning towards the Miller Multimatic 200. I figure that way I can have a machine capable of all 3 processes, it will take up little space and I will be able to take it with for projects outside the house, etc. What advice can you guys give?

  • HomerJSapien
    replied
    Great. I did a little stick welding & flux-core yesterday. The machine is a pleasure to weld with.

    Leave a comment:


  • juancarlos20121
    replied
    Miller Multimatic 200

    I Will keep u updated I'm going to try both solid wire with c25 and flux core dual shield with either c25 or c02

    Leave a comment:


  • HomerJSapien
    replied
    No problem Juan. The files were actually too large. I had to reduce the size a bit to get them uploaded. Enjoy those welders.

    Leave a comment:


  • juancarlos20121
    replied
    Miller Multimatic 200

    Thanks homer

    Leave a comment:


  • HomerJSapien
    replied
    The last two pics...
    Attached Files

    Leave a comment:


  • HomerJSapien
    replied
    Nice welders. Looks like you've got a nice setup. Here you go...
    Attached Files

    Leave a comment:


  • juancarlos20121
    replied
    Miller Multimatic 200

    Sent

    Leave a comment:


  • HomerJSapien
    replied
    send it to ylohog@hotmail.com

    Leave a comment:


  • juancarlos20121
    replied
    Miller Multimatic 200

    What's your email

    Leave a comment:


  • HomerJSapien
    replied
    I think so. Send them to me...

    Leave a comment:


  • juancarlos20121
    replied
    Miller Multimatic 200

    If I send you the pics via email can you upload them for me

    Leave a comment:


  • HomerJSapien
    replied
    I can't say for sure, but try reducing the size of the pics. They may be too large. I had trouble on the Hobart welding forum. No matter what I tried, I couldn't upload anything...

    Leave a comment:


  • juancarlos20121
    replied
    Miller Multimatic 200

    I'm trying to post it now and it won't let me upload no pics I have tried everything

    Leave a comment:


  • HomerJSapien
    replied
    Where have you been trying to post them from?

    Leave a comment:

Working...
X