Announcement

Collapse
No announcement yet.

Welder Skid pics!!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Welder Skid pics!!

    Name:  db3064fbbbd46399e784f1f605326e55.jpg
Views: 1
Size:  52.2 KBName:  0e499ce81880e1c0956831f2809fdac4.jpg
Views: 1
Size:  57.0 KBName:  0909445c5a918024b8ed15e6eb6f3c9f.jpg
Views: 1
Size:  86.8 KB
    I finally thought to post a couple pics of my set up,,
    works great for me,,but always looking to improve,, Next is a nice set of alum tool boxes that sit top side with more room,, thought these were all i would need but
    ah NO!!
    made the spools, except for the air line spool and the tiger torch spool!
    skid is complete with Oxy/Propane,100 feet of torch hose,gas compressor,double reserve air tanks,2 stage filter system,work table,vise,200 feet of extension cord,150 feet of leads,75 feet of wire feed leed,TWO fire ext.,
    All the hand tools i can cram in the boxes and back seat,air arc,two rod ovens that run of a 12 volt invertor,and a bit more but I think you alll get the picture!!
    Last edited by hjm; 02-02-2013, 10:02 PM.

  • #2
    Welder Skid pics!!

    Nice extremely well thought out. How do you get it in and out of the truck forklift?
    Never Satisfied

    Millermatic 211
    Maxstar 150STL
    Metabos
    Kennedy Maintenance Pro Full
    Makita Cordless 18v Li-Ion
    Stihl TS 420

    Timfrank88@live.com

    Comment


    • #3
      Originally posted by Rezeppa View Post
      Nice extremely well thought out. How do you get it in and out of the truck forklift?
      No I picked up 4 trailer jacks, I cut the feet off them and welded on 3' extensions, now if I want it off I remove the tailgate slide the jacks in each corner then slide one on each side at the front jack it up and drive away!

      Comment

      Working...
      X