Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Welder Skid pics!!

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Welder Skid pics!!

    Name:  db3064fbbbd46399e784f1f605326e55.jpg
Views: 1
Size:  52.2 KBName:  0e499ce81880e1c0956831f2809fdac4.jpg
Views: 1
Size:  57.0 KBName:  0909445c5a918024b8ed15e6eb6f3c9f.jpg
Views: 1
Size:  86.8 KB
    I finally thought to post a couple pics of my set up,,
    works great for me,,but always looking to improve,, Next is a nice set of alum tool boxes that sit top side with more room,, thought these were all i would need but
    ah NO!!
    made the spools, except for the air line spool and the tiger torch spool!
    skid is complete with Oxy/Propane,100 feet of torch hose,gas compressor,double reserve air tanks,2 stage filter system,work table,vise,200 feet of extension cord,150 feet of leads,75 feet of wire feed leed,TWO fire ext.,
    All the hand tools i can cram in the boxes and back seat,air arc,two rod ovens that run of a 12 volt invertor,and a bit more but I think you alll get the picture!!
    Last edited by hjm; 02-02-2013, 09:02 PM.

  • #2
    Welder Skid pics!!

    Nice extremely well thought out. How do you get it in and out of the truck forklift?

    Comment


    • #3
      Originally posted by Rezeppa View Post
      Nice extremely well thought out. How do you get it in and out of the truck forklift?
      No I picked up 4 trailer jacks, I cut the feet off them and welded on 3' extensions, now if I want it off I remove the tailgate slide the jacks in each corner then slide one on each side at the front jack it up and drive away!

      Comment

      Working...
      X
      Special Offers: See the latest Miller deals and promotions.