Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Bernard wire feed guns

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bernard wire feed guns

    Which model is best for running stainless beads ?

  • #2
    bernard guns

    like most mis guns,the amp size is related to the materials your welding.
    so go to the basic question. what am i welding?.
    what thinkness is it?
    what wire size am i useing?
    at high amps or volts ,your gun maybe required to be water cooled?
    then you will zero in on maybe a bernard 300/400?

    the guns are very good ,and i have use them menny years.
    word of causion: do not twist or kink a mig gun cable. the wire may get stuck,even for a second. this will cause the wire to come off on you drive rolls and you will think that the problem is something else. so be carefull.

    one thing else. antie-splatter. spray some on you wire. this will not in any way hurt your gun and will alow smoth travel by the wire, in side your cable,get rid of dirt that naturally is picked up during your welding. .

    Comment


    • #3
      Add Content

      Comment


      • #4
        Bernard wire feed guns

        I'll be welding on 12" sched 10 ,316 stainless
        .030 or .035 hard wire on the bead and .035 or .045 Dual shield on the cap .
        Thanks for the input 48 !

        Comment


        • #5
          I have had Bernards for years. Go tweco?

          Comment


          • #6
            Bernard wire feed guns

            I will check it out thanks 48

            Comment


            • #7
              Look on ebay. I bought one for just over $100.00. Nice gun

              Comment


              • #8
                Bernard wire feed guns

                Right on thanks Ray !

                Comment


                • #9
                  I love my Q300 the swivel neck is super nice. I have never used a tweeco gun so i cant say which is better but Bernards are nice guns

                  Comment


                  • #10
                    Bernard wire feed guns

                    Thanks for the input ,metalwork !!
                    I will check it out !

                    Comment

                    Working...
                    X
                    Special Offers: See the latest Miller deals and promotions.